Features:
6 probe can be used (F400, F1, F1/90 °, F10, N1, CN02) were measured;
Three calibration methods: one-point calibration, two-point calibration, the basic calibration;
Display Resolution: 0.1μm (measuring range is less than 100μm)
1μm (measurement range greater than 100μm)
There are two modes: direct mode and burst mode
There are two measurements: continuous measurement and the single measurement
There are two shutdown modes: manual and automatic shut off
Can be set to gauge: The gauge can be measured outside the automatic alarm, and the histogram of the number of measurements available for analysis;
A delete function: Set on the gross error and error handling can be deleted;
Print function: print measurement measurements, statistics, gauge, histogram
Specifications:
|
Type |
CTG2100F |
CTG2100N |
CTG3100 |
CTG4100 |
|
Measuring principle |
Magnetic |
Eddy |
Magnetic/Eddy |
Magnetic/Eddy |
|
Measuring range |
Standard probe（F1/N1)：1～1250μm |
|
Accuracy |
±（2%H+1）μm（Zero calibration ）
±[(1～3)%H+1] μm（Two-point calibration ） |
|
Statistics |
Mean (MEAN), maximum (MAX), minimum (MIN), the number of tests (NO), standard deviation (S. DEV) |
|
Storage and statistics |
15 measurements |
|
Accuracy |
± (2% H +1) μm (zero calibration)
± [(1 ~ 3)% H +1] μm (two-point calibration) |
|
Zero calibration |
√ |
√ |
√ |
√ |
|
Two-point calibration |
√ |
√ |
√ |
√ |
|
Delete function |
√ |
√ |
√ |
√ |
|
Automatic shutdown |
√ |
√ |
√ |
√ |
|
Beep Tips |
√ |
√ |
√ |
√ |
|
Measurement |
√ |
√ |
√ |
√ |
|
Voltage indication |
√ |
√ |
√ |
√ |
|
Error
Tips |
√ |
√ |
√ |
√ |
|
|
|
|
|
|
Standard delivery |
Main unit |
Main unit |
Main unit |
Main unit |
|
F1 probe |
N1 probe |
F1(N1) probe |
F1(N1) probe |
|
Matrix
Calibration sheet
Manual
Box |
Matrix
Calibration sheet
Manual
Box |
Matrix
Calibration sheet
Manual
Box |
Matrix
Calibration sheet
Manual
Box |
|
Optional accessary |
F1、F400、F10 probe
N1、N400 probe |
Communication Software
F1、F400、F10 probe
N1、N400 probe |
|
Probe model |
F400 |
F1 |
F1/90o |
F10 |
N1 |
CN02 |
|
Operating principle |
Magnetic induction |
Eddy current |
|
Measuring range (μm) |
0-400 |
0-1250 |
0-10000 |
0 to 1250 μm
0 to 40μm (for chromeplate on copper) |
10~200 |
|
Low range resolution (μm) |
0.1 |
0.1 |
10 |
0.1 |
1 |
|
Accuracy |
One-point calibration (μm) |
±(3%H+1) |
±(3%H+10) |
±(3%H+1.5) |
±(3%H+1) |
|
Two-point calibration (μm) |
±[(1~3)H%+0.7] |
±[(1~3)H%+1] |
±[(1~3)%H+10] |
±[(1~3)%H+1.5] |
- |
|
Measuring conditions |
Min curvature of the min area (mm) |
Convex |
1 |
1.5 |
Flatten |
10 |
3 |
Flatten |
|
Diameter of the min area (mm) |
φ3 |
φ7 |
φ7 |
φ40 |
φ5 |
φ7 |
|
Critical thickness of substrate (mm) |
0.2 |
0.5 |
0.5 |
2 |
0.3 |
unlimited | |
